Getting started
Connect your router via Ethernet as per instructions in the box.
Configure the router via web browser:
http://192.168.1.1/
Basic Config
Quick Start, Login Settings
User ID: userid@netro.com.au
Password: <your password>
Encapsulation: PPPoE
VPI: 8
VCI: 35
[Connect]
Save Settings (Important!)
Security
Tools, User Management:
User Name: admin
Password: <your password>
Confirmed Password: <your password>
Administration
Advanced, Access Control:
Tick: Enable Access Control
Tick:
Web, Enable WAN
New IP Address, Tick Add & Apply:
192.168.1.100 (please verify this is your
IP address, otherwise you will be locked out)
203.18.16.1 (Netro Support)
Advanced, LAN Clients
New IP Address: 192.168.1.100
Hostname: PC
Advanced, Port Forwarding:
Category: Apps
eg VNC, Add
Savings changes (Important!)
Tools, Save All
Commit
Firmware
Status, Product Information
Original: 38.51.2
Update: 38.51.4 (Addresses issue of Port Forwarding)
Links
Netcomm NB5 Downloads
Netcomm NB5
Knowledge Base
Netcomm NB5 ADSL2+
Upgrade
Last updated: Aug 05